How to Specify Material Grade on Stamping Engineering Drawings

This guide explains how to format material specifications on engineering drawings. It covers standard notation, required properties, and tolerance definitions. Clear material requirements prevent costly rework and ensure suppliers select the correct sheet for stamping.
- Use standardized notation for material grades to avoid supplier interpretation errors.
- Define required properties such as yield strength and hardness, not just the grade name.
- Specify surface finish and tolerance requirements to match the final part function.
- Review the drawing with the supplier to confirm they understand all material requirements.
Prerequisites: What Must Be Ready Before Writing the Spec
Before adding material requirements to a new stamping engineering drawing, gather the design intent for the part. Engineers must know the functional requirements first. A connector, a bracket, or an electrical enclosure all demand different material behaviors. The supplier cannot guess the intent from a grade name alone.
Confirm the forming method. Deep drawing, blanking, or progressive die stamping each stress the sheet differently. A material that works for shallow drawing may fail in a high draw ratio. Check the previous revision history. If the part changed, the material might need to change as well.
Collect the internal quality standards. Many manufacturers have preferred supplier lists. If a specific steel mill or coating type is required, note it now. This prevents a situation where the supplier ships a generic grade that meets the basic spec but lacks the internal traceability the buyer needs.
Step 1: Select the Base Material Grade
Start with the material family. Choose steel, aluminum, or copper alloy based on cost, weight, and corrosion resistance. For most structural stamping, carbon steel or alloy steel is common. For electrical applications, copper or brass may be required.
Do not just pick the cheapest option. Consider formability. A high strength steel might be cheaper per ton but require more press tonnage. If the press is already loaded near capacity, a slightly lower strength grade might save on tooling wear and cycle time. The drawing must reflect the final choice, not a placeholder.
Step 2: Apply Standard Steel Grade Notation
Use the notation system required by your region and industry. In the United States and Canada, ASTM standards are common. In Europe, EN or DIN standards are standard. Mixing systems on a single drawing creates confusion.
For example, a drawing for an automotive bracket might specify “ASTM A36” or “EN 10110 S235JR”. The letter codes indicate the material family and the number indicates the strength level. Always include the full standard reference. Do not use shorthand like “A36” without the “ASTM” prefix. This ensures the supplier orders the exact plate or coil specification.
Step 3: Define Mechanical Properties Beyond the Grade Name
The grade name is a starting point, not the whole story. Specify the minimum yield strength and ultimate tensile strength. For deep drawn parts, elongation is critical. A low elongation value leads to cracking during the draw.
If the part will be heat treated, state the condition. “Normalizing” or “Annealing” are common conditions. For aluminum, specify the temper, such as “5052-H32”. The temper determines the work hardening rate. Without this, the supplier might ship soft sheet that fails in the final assembly.
Step 4: Specify Surface Finish and Coating
Coatings affect the friction during stamping. A zinc coated steel coil behaves differently than a bare steel coil. Specify the coating type, such as “Galvanized” or “E-coat”.
State the coating weight if it is critical. Heavier coatings are more resistant to corrosion but may have less formability. For painted parts, specify the surface texture. A smooth surface is better for paint adhesion. A textured surface may be required for structural bonding. The supplier must match the surface to the downstream process.
Step 5: Set Thickness and Tolerance
List the nominal thickness clearly. For sheet metal, thickness is measured in thousandths of an inch or millimeters. State the unit explicitly to avoid conversion errors.
Define the tolerance. Standard tolerances exist for sheet thickness, but tight tolerances increase cost. If the part fits into a housing with a small gap, specify a tighter tolerance. For example, “1/8 inch +/- 0.002” is different from “2mm +/- 0.1”. The supplier needs to know which gauge to buy and how much machining is required.
Step 6: Address Special Requirements
Some materials require special handling. Stainless steel may need a specific passivation treatment. Aluminum may require a specific alloy designation, such as “6061-T6”.
If the part requires a specific orientation for the grain, state it. For high strength alloys, grain direction affects forming. If the part will be welded, specify the welding procedure. The material must be compatible with the welding process.
Step 7: Reference the Drawing Title Block
Place the material information in the title block of the engineering drawing. This is the standard location for suppliers to find the primary data.
Include the material spec number in the title block. For example, “Material: ASTM A500 Grade 500”. Also, include a note if the material is a substitute. “Substitute: EN 10110 S235JR allowed with approval.” This gives the supplier flexibility while maintaining control.
Common Mistakes in Material Specification
One major mistake is using a brand name instead of a standard grade. Brands change. Standards are permanent. If you specify a brand, the supplier may not be able to source it later.
Another error is omitting the temper for aluminum. Without the temper, the sheet may be too soft or too hard for the stamping operation.
A third mistake is ignoring the coating thickness. A thin coating may flake off during stamping. Specify the coating weight to ensure it stays on the part.
A fourth mistake is not defining the tolerance for thickness. Without a tolerance, the supplier assumes standard tolerance. This may lead to assembly issues.
Step 8: Review with the Supplier
Before releasing the drawing, send a copy to the supplier. Ask them to confirm they can source the material. Ask them to confirm the tolerances are achievable.
Get their feedback in writing. If they suggest a substitute, document it. If they cannot meet the spec, find an alternative before the tooling is built. This step catches errors early.
Step 9: Version Control and Change Management
When the material changes, update the drawing number. Do not just overwrite the old spec. Use a revision letter or number.
If the material changes due to supply issues, document the reason. This helps future engineers understand why the change was made.
Final Verification Step
Before releasing the drawing for production, perform a final check. Read the material spec aloud. Check the standard reference. Check the properties. Check the coating. Check the tolerance.
Compare the spec with the part design. Does the material match the function? Does the thickness match the forming requirements? Does the coating match the finish requirements?
If any question remains, resolve it before release. A clear material specification prevents disputes, rework, and production delays.
Table: Common Material Specification Elements
| Element | Example | Purpose |
|---|---|---|
| Material Grade | ASTM A36 | Identifies the base material |
| Standard | EN 10110 | Defines the specification source |
| Yield Strength | 250 MPa | Ensures structural integrity |
| Surface Finish | Galvanized 90gsm | Protects against corrosion |
| Thickness | 1.5mm | Matches forming requirements |
| Tolerance | +/- 0.1mm | Controls fit and function |
Step 10: Document Substitutions
Sometimes the specified material is unavailable. Document any approved substitutions in the drawing notes. Use a clear statement like “Substitute: EN 10110 S235JR”.
This prevents the supplier from guessing. It also provides a record for future reference.
Step 11: Train the Engineering Team
Ensure all engineers on the team use the same format for material specifications. Create a template for the title block.
Use the template to maintain consistency. This reduces errors and speeds up the drawing release process.
Final Thoughts
A clear material specification is the foundation of a successful stamping project. It communicates the design intent to the supplier. It ensures the right material is sourced and formed.
By following these steps, engineers can create drawings that are clear, accurate, and easy to produce. The result is a part that meets the design requirements and performs as intended.
Frequently asked questions
What is the difference between a material grade and a standard?
A material grade is the specific material, such as A36 steel. A standard is the document that defines the properties, such as ASTM A36. The drawing must include both.
Can I use a brand name for the material?
It is not recommended. Brand names change and may not be available. Use standard grades to ensure long-term sourcing.
How do I specify aluminum temper?
Use the alloy designation and temper, such as 6061-T6. The temper determines the strength and work hardening rate.
What if the supplier cannot source the material?
Document any approved substitutions in the drawing notes. This prevents the supplier from guessing.
Where should the material spec be placed on the drawing?
Place it in the title block. This is the standard location for suppliers to find the primary data.


